These standard dryers work for all types of shops, but are mostly used for small to medium-sized repairs and for primers, but have sufficient output to cure all kinds of paint materials.

• Curing area 79" x 55".
• Smart stand design allows maximum cassette height of approx. 7' horizontally and 8' vertically.
• Electronic distance indicator makes it very easy to use
• Power rating 6 kW
• Gold plated Free-Form reflectors for optimal heat distribution
• Two cassette heads. 6kW
• 12 Presets and 3 custom programs Specifications: Power rating - 6kW 220 Volts, 60 Hz Single Phase, 26A Minimum distance from panel - 24"

Using short wave infrared, the IRT-4 is ideal for curing small to medium-sized surfaces and has a maximum height of 88" which enables curing roofs on larger vehicles such as SUV's, pickups and minivans. It speeds up drying of putty, filler, base and clear coat. Powerful ventilation with particle filter cools the 3kW cassette and prolongs the life of the bulbs.

• Designed for vertical & horizontal applications
• Gold-coated FreeForm reflectors for optimal heat distribution
• Cure Area of 40" x 43"
• Vertical cassette that uniquely repositions allowing for hood repair as well
• Two manual timers - for ease of use Flash Off - 50% power Full Bake - 100% output

Specifications: Power rating - 3kW 220 Volts, 60 Hz Single Phase Minimum distance from panel - 24"

Reduce time and increase labor productivity and profits with the Motor City Lift King! It is a FAST, EASY, and SAFE way to remove or install a pick-up box or topper.

• Designed to allow one person to remove and move pick-up boxes and toppers.
• Patented mechanical lift with rugged design, requiring no power or fuel, and minimal maintenance.
• Superior load stability.
• Heavy lifting done mechanically rather than manually.
• Quickly goes from the stored position to the working position in less than 1 minute.
• The main component folds up with 3 pins and only requires 3 square feet for storage.
• Weight Capacity, 600 lbs.
• Footprint, in use: 7' with boom extended
• Footprint, folded up: 3' x 40"W
• Height: 81"
• Lifts up 5 foot
• Made in the USA

Includes: - LIFT KING VEHICLE LIFT - LIFT KING BOX ATTACHMENT - LIFT KING BOX ATTACHMENT BUSHING KIT

The Motor City Lift King is designed to switch from one attachment to another in seconds with only a couple pins.

Keep your tools organized and in good condition with handy tool boards. Toolboard measures 4'x4', hooks are included. Tools are heat treated steel.

• #5079 Tool Board with Hooks
• #0200 C™ Clamp
• #0205 Dyna-Mo™ Clamp
• #0300 Jr™ Clamp
• #0305 Dyna-Mo™ Jr Clamp
• #0405 Dyna-Mo™ W Clamp
• #0550 T.O.™ (Tight Opening) Clamp
• #0660 Long Nose™ Clamp
• #0670 Baby Box™ Clamp
• #0680 Big Mouth™ Clamp
• #1250 Panel Puller
• #1300 Sill Hook™
• #1800 Track Hook™ (Qty. 2)
• #2400 3MA™ Multi-Adapter Plate
• #3110 Small Flat Nose Sheet Metal Hook
• #3130 Large Flat Nose Sheet Metal Hook
• #4130 Hole Plug (Qty. 2)
• #4145 Double Grab Hook Assembly (Qty. 2)
• #5616 Door Post Puller/Twister
• #5800 G Clamp
• #6311 Ford "T" Hook Tie-Downs (Qty. 2)
• #6302 30" Sling w/Pear and Triangle
• #6350 Cable Sling
• #6400 Regular Deep Hook Set

The Autotron is the most powerful, safe, versatile and complete induction heating system available to collision repair, automotive recycling facilities, and other automotive professionals. Rated at 1,400 watts output from a standard 110 Volt input. The safe electromagnetically induced heat is very focused and limited to the immediate area where applied; heats nuts and bolts cherry red in seconds without flame.

• Ideal for removing glass, decals, side moulding and spray-in bed liners. 1 Year Warranty.
  
• R & I quarter glass in less than 0.2 hours
  
• R & I side mouldings in less the 0.1 hours & re-use original OEM tape
  
• Removes graphics & stripes within seconds (Glue is removed with stripe)
  
• Quickly remove spay-in bedliners with little effort
  
• Safely remove adhesive bonded components (roof panels, appliques, etc...) for reuse
  
• Reduce the need for rubber/abrasive wheels and other consumables
  
• Perform tasks that couldn't be done with traditional heat sources
  
• Over a 100 of autobody repair and industrial applications

Included in Kit:

Autotron 3300
Body Pro Inductor
Glass Pro Inductor
Bolt Pro Inductor
3 Versa Wedges
Training DVD & Manual

Specifications:

Analog Output meter
3 heating inductors-Glass, Body Mouldings and Bolt Pro
Solid State Technology
45 kHz to 60 kHz frequency range
2 output power levels
Over 3300 watts of output power
Compact Size: 9" x 9" x 14"

Paintless dent repair and metal shrinking can be done when using the optional SP0054 Magnapopper Inductor.

This Dolly gives you greater control to move vehicles safely and easily through your shop. The 6" high-impact wheel casters swivel 360 degrees to allow for multi-directional use.Use on any vehicle

• Move vehicles into paint booths
• Across doorway thresholds and low driveway entry curbs
• Over rough and uneven surfaces
• Includes rocker and hub adaptor
• Each dolly holds 4,000 lbs. (1,000 lbs per caster)

THE MAXI is a 220 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas. The efficiency of this tool increases the worker's productivity while producing a cleaner, better repair.

Taking the idea of a stud welder one step further, this versatile tool will:

• Weld pins
  
• Weld a slide hammer directly to the panel
  
• Weld a light pulling rod
  
• Weld wiggle wire for even crease pulling
  
• Weld a rod for leverage pulling
  
• Shrink metal 
  
  Complete kit includes:
  

• "The Maxi" 220 volt unit
  
• 2 light pulling rods
  
• 2 slide hammer rods
  
• Strike weight
  
• Stud pin electrode
  
• Shrinking electrode
  
• Wiggle wire weld tip
  
• 9 and 4 finger "Bear Claw"
  
• 500 stud weld pins
  
• 1 pound of wiggle wire
  
• 21' of power cable
  
• 9' of welding cable
  
• 5 year warranty
  
  This item is subject to its manufacturer's MAP Policy. If you have any questions regarding the price of this product, please call 1-800-367-6575 to speak to a member of our knowledgeable sales staff.

The Bumper Smith is a station that makes plastic welding quick and easy. The Bumper Smith uses nitrogen as a shielding gas, preventing burning and oxidation, which produces stronger, high quality welds. From bumper covers to plastic head lamps and fenders, the Bumper Smith has all the tools you'll need, including a fold-out work station, to repair plastics that may have otherwise been thrown out. Now features powder coated frame, arms and control panel.

Includes:

• Nitrogen Welding Station
  
• Cart with two trays
  
• Welding rods - polypropylene
  
• 40' Urethane welding rod
  
• 1" Aluminum tape
  
• 1 Spaghetti welder
  
• 1 Hot air welder (nitrogen)
  
• 2 Welder cradles
  
• Cradle for nitrogen tank
  
• Regulator for nitrogen tank
  
• 10' work hose
  
• DVD set "Guide to Welding Plastic"
  
• Some assembly required